ar0941s868301ps
Tightening procedure for charge air distributor
Type ar · emne 09.41 · version 0100 · 2018-12-14
Gælder for: Engine 642 in model 470, 471
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 1 Motor › 09 Luftindsugning, luftladning › 09.41 Ladeluftrør/ladeluftkøling — Serie 470 · Serie 471
EinPAS 15 Motor › 15.30 Luftindsugning/opladning › 15.30.33 indsugningsrør/ladeluftrør — Serie 470 · Serie 471
Gælder også for motorer/gearkasser: 642 ***
AR09.41-S-8683-01PS
| Tightening procedure for charge air distributor
|
|
|
Engine
| 642 in model 470, 471
|
Charge air pipe, charge air cooling, mixer housing
|
Number
| Designation
|
| Engine 642
|
BA09.41-N-1019-01O
| Screw, left/right charge-air distributor to left/right cylinder head
| Nm
| 18
|
1
| Tighten screws (1 to 19) of left and right charge-air distributors in numerical order .
|
|
| Make sure to adhere to the specified order and observe the different shank lengths.
Otherwise, consequential damage occurs on engine.
|
2
| Then tighten screw (1) and screw (11) again with tightening torque .
|
