ar0941p6295oln

Remove/install boost pressure sensor for low-pressure exhaust gas turbocharger

Type ar · emne 09.41 · version 0100 · 2020-07-08

Gælder for: Engine 654.8 in model 213, 238, 257

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 09 Luftindsugning, luftladning › 09.41 Ladeluftrør/ladeluftkøling — Serie 213 · Serie 238 · Serie 257 · Serie 654 (modeller 8**)

EinPAS 15 Motor › 15.30 Luftindsugning/opladning › 15.30.12 Sensor/kontakt/ledningssæt — Serie 213 · Serie 238 · Serie 257 · Serie 654 (modeller 8**)

AR09.41-P-6295OLN

Remove/install boost pressure sensor for low-pressure exhaust gas turbocharger

22.06.2020

Engine

654.8 in model 213, 238, 257

Remove/install boost pressure sensor for low-pressure exhaust gas turbocharger

3

Screw

B5/4

Low-pressure turbocharger boost pressure sensor

P09.41-A233-06

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Remove upper engine cover.

AR01.10-P-2405OLC

2

Release and disconnect electrical connector from low-pressure exhaust gas turbocharger boost pressure sensor (B5/4).

3

Remove screw (3) and pull low-pressure exhaust gas turbocharger boost pressure sensor (B5/4) out of holder.

Installation: Replace low-pressure exhaust gas turbocharger boost pressure sensor (B5/4).

4

Install in the reverse order.

5

Read out and delete fault memory.

Engine 654.8 in model 213

AD00.00-P-2000-04B

Engine 654.8 in model 238

AD00.00-P-2000-06LWO

Engine 654.8 in model 257

AD00.00-P-2000-06FR

Henviste dokumenter