Remove/install charge air temperature sensor

AR09.41-P-2002CD

Remove/install charge air temperature sensor

23.4.12

 

Remove/install

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

1.1

Remove underfloor paneling

Model 166.0

AR61.30-P-1001GQ

1.2

Remove soundproofing bottom section in the center

Model 172.4

AR94.30-P-5300W

Model 204.9

AR61.20-P-1105CY

Model 204.0/2/3, 207, 212, 218

AR94.30-P-5300EW

1.3

Detach lower engine compartment paneling

Model 221 except CODE (Z07) Top protection

AR61.20-P-1105SX

2

Disconnect electrical connector (4) from charge air temperature sensor (B17/8)

 The electrical connector (4) also, at the time, secures the snap-in bracket on the charge air temperature sensor (B17/8).

3

Press together snap-in bracket and disengage charge air temperature sensor (B17/8) at the mount

 Do not unlatch or latch charge air temperature sensor (B17/8) with the electrical connector (4) to ensure that the snap-in bracket is not overstretched. Always replace charge air temperature sensor (B17/8) with defective snap-in brackets.

 Installation: Replace sealing ring.

4

Pull out charge air temperature sensor (B17/8)

5

Install in the reverse order