ar0941i1311c

Remove/install charge air pipe

Type ar · emne 09.41 · version 0103 · 2009-11-16

Gælder for: ENGINES 904.941 in MODEL 684.482 From charge air cooler to charge air manifold

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 09 Luftindsugning, luftladning › 09.41 Ladeluftrør/ladeluftkøling — Serie 684 (modeller 482) · Serie 904 (modeller 941)

EinPAS 15 Motor › 15.30 Luftindsugning/opladning › 15.30.33 indsugningsrør/ladeluftrør — Serie 684 (modeller 482) · Serie 904 (modeller 941)

AR09.41-I-1311C

Remove/install charge air pipe

6.11.09

ENGINES 904.941 in MODEL 684.482
From charge air cooler to charge air manifold

Remove/install charge air pipe

I09.41-0001-12

1 Black charge air hose

2 Charge air pipe (cold air)

3 Screw

4 Clip

5 Charge air pipe (warm air)

6 Nut

Remove/install

1

Remove black charge air hose (1)

Installation: The black
charge air hose (1) is not temperature resistant. It must always be installed between the associated
charge air pipe (2) and charge air cooler. Clean sealing surfaces. Check clamps; replace if necessary.

2

Remove charge air pipe (2)

Installation: Clean sealing surfaces.

*BA09.41-N-1004-01B

*BA09.41-N-1005-01B

3

Install in the reverse order

Charge air pipe/charge air cooling

Number

Designation

Engine
904.941 in model 684

BA09.41-N-1004-01B

Bolt, charge air pipe to alternator carrier

Nm

30

BA09.41-N-1005-01B

Nut, charge air pipe to charge air pipe

Nm

30