ar0941g2008n
Remove/install charge air pressure and temperature sensor
Type ar · emne 09.41 · version 0101 · 2018-11-02
Gælder for: Engine 470.9, 471.9 in model 800.110/112
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 1 Motor › 09 Luftindsugning, luftladning › 09.41 Ladeluftrør/ladeluftkøling — Serie 470 (modeller 9**) · Serie 471 (modeller 9**) · Serie 800 (modeller 110, 112)
EinPAS 15 Motor › 15.30 Luftindsugning/opladning › 15.30.12 Sensor/kontakt/ledningssæt — Serie 470 (modeller 9**) · Serie 471 (modeller 9**) · Serie 800 (modeller 110, 112)
AR09.41-G-2008N
| Remove/install charge air pressure and temperature sensor
| 09.10.2018
|
Engine
| 470.9, 471.9 in model 800.110/112
|
1
| Charge air pipe
|
B608
| Charge air pressure and temperature sensor in charge air pipe
|
Topical note
| Notes on avoiding damage through contamination and foreign objects
|
| AH00.00-N-5000-01H
|
| Remove/install
|
|
|
1
| Disconnect electrical connection on charge air pressure and temperature sensor in charge air pipe (B608).
|
|
|
2
| Remove charge air pressure and temperature sensor in the charge air pipe (B608).
| Installation: Replace O-ring.
|
|
|
|
| Bolt, charge air pressure and temperature sensor in charge air pipe
| *BA09.41-N-1001-04A
|
3
| Install in the reverse order.
|
|
|
Number
| Designation
|
| Engine 470.9, 471.9, 473.9
|
BA09.41-N-1001-04A
| Bolt, charge air pressure and temperature sensor in charge air pipe
| Nm
| 10
|
Henviste dokumenter
- ah0000n500001h Oplysninger om forebyggelse af skader på grund af snavs og fremmedlegemer
