ar0941d868101d

Remove/install charge air pipe on charge air manifold

Type ar · emne 09.41 · version 0115 · 2010-01-26

Gælder for: ENGINE 904.904 in MODEL 670 ENGINE 904.908 /914 /923 /936 in MODEL 668, 670

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 09 Luftindsugning, luftladning › 09.41 Ladeluftrør/ladeluftkøling — Serie 668 · Serie 670 · Serie 904 (modeller 904, 908, 914, 923, 936)

EinPAS 15 Motor › 15.30 Luftindsugning/opladning › 15.30.33 indsugningsrør/ladeluftrør — Serie 668 · Serie 670 · Serie 904 (modeller 904, 908, 914, 923, 936)

AR09.41-D-8681-01D

Remove/install charge air pipe on charge air manifold

Crankcase ventilation, cylinder head cover

Number

Designation

Engines
900.9, 902.9, 904.9, 906.9

BA01.20-N-1002-01B

Bolt, oil filler neck to charge air pipe of charge air manifold

Nm

25

Air filter

Number

Designation

Engine
904.9

BA09.10-N-1001-01B

Air intake hose to charge air pipe of charge air manifold

Nm

10

Charge air pipe/charge air cooling

Number

Designation

Engine
904.9 in model 668, 670

BA09.41-N-1002-01B

Bolt, charge air pipe bracket of charge air manifold

Nm

35

BA09.41-N-1003-01B

Bolt, charge air pipe to charge air manifold

Nm

50

Remove/install charge air pipe on charge air manifold

D09.41-0001-01

1 Slacken hose clamp (3) on charge air hose (2).

Inspect condition of hose clamp (3), replace if necessary.

Remove/install charge air pipe on charge air manifold

D09.41-0009-01

2 Remove bolts (4) on oil filler neck and bolt (5) on air intake hose.

Installation: Observe tightening torques.

Remove/install charge air pipe on charge air manifold

D09.41-0002-02

3 Remove bolt (6) on bracket and bolts (7) on charge air manifold.

Installation: Observe tightening torques.

4 Pull out charge air pipe (1) from charge air hose (2) and remove upwards.

5 Take off seal (8).

Installation: Replace gasket (8).

6 Install in the reverse order.