ar0940t200002b

Perform charge pressure test

Type ar · emne 09.40 · version 0101 · 2005-07-12

Gælder for: ENGINE 441.980 in MODEL 613.355 ENGINE 441.980 in MODEL 613.365 /364 ENGINE 402.970 in MODEL 613.455 ENGINE 402.970 in MODEL 613.485

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 09 Luftindsugning, luftladning › 09.40 Turbolader — Serie 441 (modeller 980) · Serie 613 (modeller 355, 364, 365, 455, 485)

EinPAS 15 Motor › 15.30 Luftindsugning/opladning › 15.30.1 Grundinformation — Serie 441 (modeller 980) · Serie 613 (modeller 355, 364, 365, 455, 485)

Gælder også for motorer/gearkasser: 402 970

AR09.40-T-2000-02B

Perform charge pressure test

Inspection data of turbocharger

Number

Designation

Engine 402.970

Engine 441.980

BE09.40-N-1001-01A

Charge pressure of turbocharger

bar

0.8

0.9

If a chassis dynamometer is available, carry out test

as specified in para A, otherwise conduct test according to para B.

A Test on chassis dynamometer

1 Rev up vehicle to top speed of a gear.

2 Apply load to dynamometer and read off charge pressure at tester.

B Test without dynamometer

1 Load up vehicle to permissible payload.

2 Conduct simulated road test with different load states (accelerating on hill or sensitive operation of parking brake) and read off charge pressure on HHT.