ar0940t200002a

Conducting charge pressure test

Type ar · emne 09.40 · version 0100 · 2005-07-12

Gælder for: ENGINE 447, 489 in MODEL 671

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 09 Luftindsugning, luftladning › 09.40 Turbolader — Serie 447 · Serie 671

EinPAS 15 Motor › 15.30 Luftindsugning/opladning › 15.30.1 Grundinformation — Serie 447 · Serie 671

Gælder også for motorer/gearkasser: 489 ***

AR09.40-T-2000-02A

Conducting charge pressure test

Test data of turbocharger

Number

Designation

Engine 447

Engine 489

BE09.40-N-1001-01A

Charge pressure of turbocharger

bar

0.7

0.7

Test on chassis dynamometer

1 Rev up vehicle to top speed of a gear.

2 Apply load to dynamometer and read off charge pressure tester.

----------------------------------------------------------------------------------------

Test without chassis dynamometer

1.1 Load vehicle up to permissible payload.

2.1 Conduct road test by simulating load conditions (accelerating on hill or gentle operation of parking brake) and read off charge pressure at HHT.

----------------------------------------------------------------------------------------

If the charge pressure is less than the specified pressure, remove turbocharger and test, replace if necessary.