ar0940p602013evo
Remove/install the oil line on the turbocharger
Type ar · emne 09.40 · version 0200 · 2013-01-23
Gælder for: ENGINE 271.8 in MODEL 172, 204, 207, 212
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 1 Motor › 09 Luftindsugning, luftladning › 09.40 Turbolader — Serie 172 · Serie 204 · Serie 207 · Serie 212
EinPAS 15 Motor › 15.20 Motorsmøresystem › 15.20.13 ledning/slange/ventil — Serie 172 · Serie 204 · Serie 207 · Serie 212
Gælder også for motorer/gearkasser: 271 8**
AR09.40-P-6020-13EVO
| Remove/install the oil line on the turbocharger
|
|
|
ENGINE
| 271.8 in MODEL 172, 204, 207, 212
|
29.11.12
| Hohlschraube Ölzulaufleitung an Abgasturbolader
|
| BA09.40-P-1007-01Q
|
Number
| Designation
|
| ENGINE 271.8
|
BA09.40-P-1010-01Q
| Bolt, oil return flow line to turbocharger
| Nm
| 9
|
Number
| Designation
|
|
| ENGINE 271.8
|
BA09.40-P-1007-01Q
| Banjo bolt, oil feed line to turbocharger
| Stage 1
| Nm
| 6
|
|
|
| Stage 2
| °
| 90
|
Number
| Designation
|
| ENGINE 271.8
|
BA09.40-P-1009-01Q
| Bolt, coolant return line/oil feed line holder to turbocharger
| Nm
| 9
|
Number
| Designation
|
| ENGINE 271.8
|
BA09.40-P-1008-01Q
| Bolt, oil feed line to cylinder head
| Nm
| 9
|
1
| Remove banjo bolt (3) for oil feed line (1a).
|
|
| Installation: Note tightening torque for banjo bolt (3).
|
|
| Installation: The banjo bolt(3) and seals must be replaced after every disassembly.
|
2
| Remove screw/bolt (6) from turbocharger.
|
|
| Installation: Note tightening torque for screw/bolt (6).
|
3
| Remove screw/bolt (5) from cylinder head and oil feed line (1a).
|
|
| Installation: Note tightening torque for screw/bolt (5).
|
|
| Installation: The seal must be replaced after every disassembly.
|
4
| Remove bolts (4) for oil return line (1b).
|
|
| Installation: Note tightening torque for screw/bolts (4).
|
5
| Remove oil return line (1b) from cylinder crankcase.
|
|
| Installation: Replace seal.
|
