ar0910w8131b

Remove/install air intake pipe

Type ar · emne 09.10 · version 0105 · 2008-04-28

Gælder for: ENGINE 906.9 in MODEL 957 except CODE (MS8) Natural gas engine

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 09 Luftindsugning, luftladning › 09.10 Luftfilter — Serie 906 (modeller 9**) · Serie 957

EinPAS 15 Motor › 15.30 Luftindsugning/opladning › 15.30.33 indsugningsrør/ladeluftrør — Serie 906 (modeller 9**) · Serie 957

AR09.10-W-8131B

Remove/install air intake pipe

4.5.07

ENGINE 906.9 in MODEL 957 except CODE (MS8) Natural gas engine

Remove/install air intake pipe

W09.10-0003-11

1 Air intake pipe

2 Air cleaner housing

3 Screw

4 Nut

5 Intake hose

6 Compressor intake hose

7 Crankcase ventilation hose

Remove/install

Danger!

Risk of injury caused by body parts being pinched or crushed as cab is tilted

Ensure that no one is within tilting range of cab as it is being tilted. Always tilt cab all the way to end position and secure with safety strut.

AS60.80-Z-0001-01A

1

Tilt cab

Notes on tilting the cab

AH60.80-N-0003-01A

2

Remove intake hose of compressor (6) from air intake pipe (1)

3

Remove crankcase ventilation hose (7) from air intake pipe (1)

4

Detach air intake pipe (1) at air filter housing (2)

5

Remove air intake pipe (1)

To do this loosen both clamps and push intake hose (5) as far as possible towards turbocharger.

Installation: Replace nut (4).

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

6

Install in the reverse order

Henviste dokumenter