AR09.10-W-1200C | Remove/install air filter monitoring sensor | 29.3.06 |
ENGINE 457.9 in MODELS 374, 375, 940, 942, 943, 944, 958
W09.10-1020-06
Shown on model 944 with code (MJ4) Air intake behind cab with round filter
1 Air filter
2 Electrical connector
3 Bolt
4 Sealing ring
B7 Air filter monitoring sensor
| Remove/install | ||
1 | Switch off ignition | ||
2 | Fold in side deflector on the right | Only if code (FD1) air spoiler with side deflectors is fitted. | |
3.1 | Remove underride guard at the side on the right | Vehicles without code (CB8) Aerodynamic side panels. | |
3.2 | Fold up side paneling on the right top | Vehicles with code (CB8) Aerodynamic side panels. | |
4 | Remove step plate at the side on the right | Only on model 375, 944. | |
5 | Disconnect electrical connector (2) at air filter monitoring sensor (B7) | ||
6 | Remove air filter monitoring sensor (B7) at air filter (1) | Installation: Clean sealing surfaces. Check sealing ring (4); replace air filter monitoring sensor (B7) if necessary. | |
| |||
7 | Install in the reverse order |
Air filter