S09.10-4534-09
1 | Clamps | 2 | Upper section of air filter housing | 3 | Air filter |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove | ||
1 | Open clamps (1) | ||
2 | Place upper section of air filter housing (2) to one side | Do not completely remove upper section of air filter housing (2). | |
3 | Remove air filter (3) | ||
| Check | ||
4 | Check air filter (3) | Depending on findings | |
| |||
Replace air filter (3). | |||
5 | Check upper section of air filter housing (2) and lower section of air filter housing for soiling | Depending on findings | |
| |||
Clean upper section of air filter housing (2) and/or lower section of air filter housing. | |||
| Install | ||
6 | Install air filter (3) | Ensure correct fit at the sealing surfaces. | |
7 | Install upper section of air filter housing (2) | Lock clamps (1). | |
Ensure correct seating of upper section of air filter housing (2) in rear guides. | |||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
8 | Check for leaktightness with engine running | Visual inspection only. | |
9 | Confirm replacement of air filter (3) in maintenance booklet or in the Digital Service Booklet (DSB) | Only if a new air filter (3) was installed. |
Henviste dokumenter
- ah0000p500001a Oplysninger om forebyggelse af skader på grund af snavs og fremmedlegemer
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører