ar0910s1050pb

Remove/install air filter

Type ar · emne 09.10 · version 0100 · 2017-05-04

Gælder for: Model 470 with engine 200

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 09 Luftindsugning, luftladning › 09.10 Luftfilter — Serie 470

EinPAS 15 Motor › 15.30 Luftindsugning/opladning › 15.30.40 luftfilter/luftfilterkasse — Serie 470

Gælder også for motorer/gearkasser: 200 ***

AR09.10-S-1050PB

Remove/install air filter

21.04.2017

Model

470 with engine 200

Remove/install air filter

1

Upper section of air filter housing

2

Clamps

3

Air filter

4

Bracket

S09.10-4540-06

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove

1

Open clamps (2)

2

Swivel upper section of air filter housing (1) upwards

3

Remove air filter (3)

Check

4

Check air filter (3)

Depending on findings

Replace air filter (3).

5

Check upper section of air filter housing (1) and lower section of air filter housing for soiling

Depending on findings

Clean upper section of air filter housing (1) and/or lower section of air filter housing.

Install

6

Install air filter (3)

Ensure correct fit at the sealing surfaces.

7

Swivel upper section of air filter housing (1) downwards

Ensure that upper section of air filter housing (1) is properly seated in brackets (4) of lower section of the air filter housing.

8

Lock clamps (2)

Check

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear buttoned-up and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

9

Check for leaktightness with engine running

Visual inspection only.

10

Confirm replacement of air filter (3) in maintenance booklet or in the Digital Service Booklet (DSB)

If the air filter (3) was replaced.

Henviste dokumenter