P09.10-2119-08
1 Intake air port
2 Front engine cover
5 Gasket
3 Air cleaner housing
4 Bracket
| Remove/Install | ||
1 | Turn key in ignition switch to position "0". | ||
2 | Open engine hood and raise to vertical position | ||
3 | Remove left and right suction fan duct (1) | ||
4 | Disengage the front engine cover (2) at the front in the upward direction (arrow A) | ||
5 | Disengage the front engine cover (2) at the left rear and right rear carefully in the upward direction (arrows B) | ||
6 | Pull out the front engine cover (2) towards the front from the air cleaner housing (3) (arrows C) | In order to avoid scratches and damage, the front engine cover (2) must be put down onto a padded base. | |
7 | Detach the air cleaner housing (3) upwards from the mounts (4) at the left and right cylinder head cover | In order to avoid scratches and damage, the air cleaner housing (3) must be put down on a padded base. | |
| Check | ||
8 | Check gasket (5) | Check for damage and correct position; if necessary, replace the seal (5) or mount it correctly. | |
9 | Apply liquid lubricant to the mounts (4) and to the seal (5) | Lubricant | |
10 | Install in the reverse order |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1002-06A | Lubricating paste, rubber parts 2.5 kg, DB supply specification 6867.00 | A 000 989 01 60 |