P09.10-2070-06
1 Pneumatic line
2 Check valve
3 Air filter housing
4 Bolt
5 Intake air duct
6 Hose
7 Rubber seal
8 Power insert
B28/4 Pressure sensor downstream of air filter, left cylinder bank
B28/5 Pressure sensor downstream of air filter, right cylinder bank
| Remove/install | ||
1 | Remove engine trim panel | ||
2 | Separate electrical connector at pressure sensor to air filter, left or right cylinder bank (B28/4, B28/5) | ||
3.1 | Disconnect pneumatic line (1) at check valve (2) and unclip retaining clip at air filter housing (3) | When removing left air filter housing.. | |
4 | Remove bolts (4) | | |
5 | Lift air filter housing (3) at rear and detach suction fan duct (5) from air filter housing (3). | ||
6.1 | Disconnect hose (6) of crankcase ventilation system. | When removing left air filter housing.. | |
7 | Take out air filter housing (3). | ||
| Check | ||
8 | Check rubber seal (7) and power insert (8) | Check correct seating and condition. Replace damaged components. | |
9 | Install in the reverse order |
Air filter