AR09.10-P-1150EVO | Remove/install air filter housing | 16.5.11 |
ENGINES 271.8 in MODEL 172, 204, 207, 212
P09.00-2107-08
1 Air cleaner housing
2 Air ducting
3 Engine air intake duct
8 Supports
N3/10 ME-SFI [ME] control unit
5 Purge line
6 Electrical line
7 Electrical line
P09.00-2108-11
1 Air cleaner housing
4 Gasket
| Remove/install | ||
1 | Remove engine intake air duct (3) | ||
2 | Detach air ducting (2) on air filter housing (1) | ||
3 | Unclip purge line (5) to air filter housing (1) | ||
4 | Unclip ME-SFI [ME] control unit (N3/10) on air filter housing (1) | Place ME-SFI [ME] control unit (N3/10) with connected electrical lines to one side. | |
Installation: Pay attention to the correct seating of seal (4) in air filter housing (1). | |||
5 | Unclip electrical line (6) from support on air filter housing (1) | ||
6 | Unlock electrical line (7) to air filter housing (1) | ||
7 | Remove air filter housing (1) upwards out of the supports (8) | ||
8 | Install in the reverse order |