AR09.10-P-0500GLC | Removing and installing the air intake snorkel | 9.12.04 |
ENGINE 612.966 in MODEL 461.331
P09.10-2142-09
1 Bracket
2 Bolt
3 Bolt
6 Counterplate
14 Air intake snorkel
4 Bolt
5 Paint protective sheet
P88.10-2158-06
14 Air intake snorkel
| Removing/installing | ||
1 | Unscrew screws (2 and 3) | ||
2 | Remove air intake snorkel (14) | Installation: Check seal ring (arrow) for correct seating and check for damage; replace if necessary. | |
3 | Remove wheelhouse cover | ||
4 | Remove bolts (4). | by holding the counterplate (6) in the fender and removing after removing the bolts (4). | |
5 | Remove holder (1) | A paint protection foil (5) must be glued to the new fender if the fender is installed new. | |
6 | Install in reverse order |