Remove/install air filter housing

AR09.10-D-1150TSV

Remove/install air filter housing

08.07.2019

Engine

642 in model 907

Modification notes

08.07.2019

Method changed and BA09.10-N-1002-01TS added

Operation step 1

1

Air cleaner housing

4

Supports

7

Jump start connector

2

Front module

5

Electrical connectors

8

Electrical wiring harness

3

Hot film mass air flow sensor

6

Air duct

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Remove air intake pipe from hot film mass air flow sensor (3).

 To do so, release the clamp on the hot film mass air flow sensor (3).

 Installation: Check clamp for damage.

 Clamp, air intake pipe to hot film mass air flow sensor

*BA09.10-N-1002-01TS

Depending on the findings,



Replace damaged clamp.

2

Disconnect electrical connectors (5).

3

Remove electrical wiring harness (8) from the air filter housing (1).

 Installation: Replace cable tie.

4

Remove jump start connector (7) from air filter housing (1).

5

Remove air duct (6) from front module (2).

6

Pull front air filter housing (1) upwards out of front module (2).

 Installation: Make sure that air filter housing (1) is seated correctly in mounts on front module (2) and air duct (6) in intake air fitting.

 Installation: Check rubber mounts in front module (2).

Depending on the findings,



Replace rubber mounts.

7

Remove air filter housing(1).

 To do this remove air filter housing (1) forwards from rear mounts (4).

 Installation: Make sure air filter housing (1) is seated correctly in rear mounts (4).

8

Install in the reverse order.



Check

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

9

Check for leaktightness when engine is running.

 Visual inspection only.

 Air filter

Number

Designation

Engine 642 in model 907

BA09.10-N-1002-01TS

Clamp, air intake pipe to hot film mass air flow sensor

Nm

4