ar0910b8030xa
Remove/install air intake hose
Type ar · emne 09.10 · version 0101 · 2019-08-12
Gælder for: Engine 904.9, 906.9, 924.9, 926.9 in model 368.0/1, 382.1, 384.06/07, 634.0, 685.282/284/289/290, 979.2
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 1 Motor › 09 Luftindsugning, luftladning › 09.10 Luftfilter — Serie 368 (modeller 0**, 1**) · Serie 382 (modeller 1**) · Serie 384 (modeller 06*, 07*) · Serie 634 (modeller 0**) · Serie 685 (modeller 282, 284, 289, 290) · Serie 904 (modeller 9**) · Serie 906 (modeller 9**) · Serie 979 (modeller 2**)
EinPAS 15 Motor › 15.30 Luftindsugning/opladning › 15.30.32 ledning/slange/ventil — Serie 368 (modeller 0**, 1**) · Serie 382 (modeller 1**) · Serie 384 (modeller 06*, 07*) · Serie 634 (modeller 0**) · Serie 685 (modeller 282, 284, 289, 290) · Serie 904 (modeller 9**) · Serie 906 (modeller 9**) · Serie 979 (modeller 2**)
Gælder også for motorer/gearkasser: 924 9**, 926 9**
AR09.10-B-8030XA
| Remove/install air intake hose
| 26.07.2019
|
Engine
| 904.9, 906.9, 924.9, 926.9 in model 368.0/1, 382.1, 384.06/07, 634.0, 685.282/284/289/290, 979.2
|
1
| Air suction flexible hose
|
2
| Air filter
|
3
| Turbocharger
|
4
| Air compressor tube (inlet)
|
5
| Engine breather tube
|
|
|
|
A
| Assembly arrangement: Bus with front engine
|
B
| Assembly arrangement: Trucks
|
| Remove/install
|
|
|
1
| Open the engine access cover
| For buses, the access to carry out maintenance and repair jobs vary according to body type/make.
Refer to the body makers instructions.
|
|
2
| Disconnect the air compressor tube (4) from the flexible air suction tube (1)
|
|
|
3
| Disconnect breather pipe (5) from the flexible air suction tube (1)
|
|
|
4
| Disconnect the flexible air suction tube (1) from the nozzle of the air filter housing (2)
|
|
|
5
| Disconnect the flexible air suction tube (1) from the turbocharger nozzle (3)
|
|
|
6
| Install in reverse order
| Check the status of all clamps.
If necessary, replace them.
|
|
