Remove/install electric motor on transmission

AR08.10-W-0015A

Remove/install electric motor on transmission

26.11.2019

Engine

924.9 in model 970

with code MY5 (BlueTec Hybrid)

1

Transmission

2

Coupling housing

3

Bolts

4

Electrical connector

5

Coupling pressure line

6

Clip

M32

Hybrid system electric motor

 

Remove/install

 Warning

Risk of injury to hands or eyes when working on hydraulic pressure reservoir systems caused by hydraulic fluid to specification 345.0 spraying out under pressure

Depressurize hydraulic pressure reservoir system before commencing work on system. Wear protective gloves and safety glasses.

AS00.00-Z-0028-01A

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Topical note

General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system

AH00.00-Z-0300-01A

1

Remove hybrid system electric motor (M32) with transmission

AR08.10-W-0005A

2

Disconnect electrical connection (4)

3

Take off clamp (6)

4

Unclip fuse and remove coupling pressure line (5)

 Installation: Replace fuse .

5

Unscrew bolts (3) around circumference of hybrid system electric motor (M32)

 Bolt, electric motor to transmission

*BA08.10-N-1002-01B

 Torque wrench

*001589662100

 Insertion tool

*112589010300

6

Remove transmission (1) from hybrid system electric motor (M32)

 Coupling housing (2) must no be removed from hybrid system electric motor (M32).

7

Install in the reverse order

 Electric motor

Number

Designation

Engine 924.9

BA08.10-N-1002-01B

Bolt, electric motor to transmission

M12

Nm

90