ar0717p7004mrd

Remove/install boost pressure control pressure transducer

Type ar · emne 07.17 · version 0102 · 2020-02-25

Gælder for: Engine 274.9 in model 213 Engine 274.9 in model 238

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 07 Blandingstilberedning › 07.17 Trykomformer, trykregulator — Serie 213 · Serie 238

EinPAS 15 Motor › 15.30 Luftindsugning/opladning › 15.30.31 Servomotor/indstillingsled/cylinder — Serie 213 · Serie 238

Gælder også for motorer/gearkasser: 274 9**

AR07.17-P-7004MRD

Remove/install boost pressure control pressure transducer

24.02.2020

Engine

274.9 in model 213

Engine

274.9 in model 238

Remove/install boost pressure control pressure transducer

Shown on engine 274.910 in model 213.040

1

Electrical connector

2

Bolts

3

Vacuum hoses

Y77/1

Boost pressure positioner

P07.17-2071-06

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Remove upper engine cover.

2

Remove engine air intake duct upstream of air filter.

3

Mark vacuum hoses (3) relative to the respective connection.

4

Detach vacuum hoses (3) from the boost pressure regulator (Y77/1).

Installation: Observe markings of the vacuum hoses (3).

5

Release electrical connector(1) and disconnect.

6

Remove screws (2) and remove boost pressure regulator (Y77/1).

7

Install in the reverse order.

8

Read out and delete fault memory.

Engine 274.9 in model 238

AD00.00-P-2000-06LWO

Engine 274.9 in model 213

AD00.00-P-2000-04B

Henviste dokumenter