Remove/install MR/PLD injection lines · ar0715w9235j · Mercedes-Benz WIS

AR07.15-W-9235J

Remove/install MR/PLD injection lines

23.11.10

ENGINES 900.9 in MODELS 375.1, 970, 972, 975, 976

ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5

ENGINES 902.9 in MODEL 957 except CODE (MS8) Natural gas engine

ENGINES 902.9 in MODELS 375.1, 970, 972, 974, 975, 976

ENGINES 924.9 in MODELS 958.0, 970, 972, 974, 975, 976

ENGINES 925.9 in MODELS 970, 972, 974

ENGINES 926.9 in MODEL 958.0

ENGINES 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958.2

W07.15-1209-08

Shown on engine 926.9

1 Engine trim panel

3 Pressure screws

2 Injection lines

	Removing
 Danger!	Risk of injury caused by body parts being pinched or crushed as cab is tilted	Ensure that no one is within tilting range of cab as it is being tilted. Always tilt cab all the way to end position and secure with safety strut.	AS60.80-Z-0001-01A
1	Tilt cab
	Notes on tilting the cab		AH60.80-N-0003-01A
2	Remove soundproofing on frame at upper left
3	Remove engine panel (1)
 Danger!	Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel	No fire, sparks, open flames or smoking. Only pour fuels into suitable and appropriately marked containers. Wear protective clothing when handling fuel.	AS47.00-Z-0001-01A
4	Remove injection line (2)		*000589070300
			*000589680300
	Install
5	Check pressure screws (3) of pressure pipe connections for correct position		*BA07.15-N-1005-01A
6	Install injection lines (2)		*BA07.15-N-1004-01A
 Danger!	Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running	Secure vehicle to prevent it from moving by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
7	Conduct engine test run and check injection lines (2) for leaks	 Also replace corresponding injection line (2) if necessary.
8	Install engine panel (1)
9	Install soundproofing on frame above on the left
 Danger!	Risk of injury caused by body parts being pinched or crushed as cab is tilted	Ensure that no one is within tilting range of cab as it is being tilted. Always tilt cab all the way to end position and secure with safety strut.	AS60.80-Z-0001-01A
10	Lower cab
	Notes on tilting the cab		AH60.80-N-0003-01A

 Diesel injection system with unit pumps (MR/PLD)

Number	Designation		Engine 900.9, Engine 902.9 without code MS8	Engine 924.9, 925.9, 926.9


BA07.15-N-1004-01A	Injection line to pressure pipe connection and unit pump	Nm	35	35
BA07.15-N-1005-01A	Thrust bolt, pressure pipe connection to cylinder head	Nm	45	45

000 589 68 03 00

Box wrench bit

Ring wrench

000 589 07 03 00

Henviste dokumenter

ah6080n000301a Oplysninger om tipning af førerhus
as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører
as4700z000101a Fare for eksplosion ved tænding, fare for forgiftning ved indånding og indtagelse af brændstof samt fare for hud- og øjenskader ved kontakt med brændstof
as6080z000101a Fare for personskade ved fastklemning og knusning, når førerhuset tippes