AR07.15-W-3000A | Change data record, software, parameters in engine control (MR) control unit | 23.11.10 |
ENGINES 457.9 in MODEL 375.4, 940, 942, 943, 944 with CODE (MS4) BlueTec 4
ENGINES 457.9 in MODEL 375.4, 940, 942, 943, 944 with CODE (MS5) BlueTec 5
ENGINES 541.9 in MODEL 930, 932, 933, 934 with CODE (MS4) BlueTec 4
ENGINES 541.9 in MODEL 930, 932, 933, 934 with CODE (MS5) BlueTec 5
ENGINES 542.9 in MODEL 930, 932, 934 with CODE (MS4) BlueTec 4
ENGINES 542.9 in MODEL 930, 932, 934 with CODE (MS5) BlueTec 5
ENGINES 900.9 in MODEL 375.1, 970, 972, 975, 976 with CODE (MS4) BlueTec 4
ENGINES 900.9 in MODEL 375.1, 970, 972, 975, 976 with CODE (MS5) BlueTec 5
ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5, 957 with CODE (MS4) BlueTec 4
ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5, 957 with CODE (MS5) BlueTec 5
ENGINES 902.9 in MODEL 375.1, 970, 972, 974, 975, 976 with CODE (MS4) BlueTec 4
ENGINES 902.9 in MODEL 375.1, 970, 972, 974, 975, 976 with CODE (MS5) BlueTec 5
ENGINES 924.9 in MODEL 958, 970, 972, 974, 975, 976 with CODE (MS4) BlueTec 4
ENGINES 924.9 in MODEL 958, 970, 972, 974, 975, 976 with CODE (MS5) BlueTec 5
ENGINES 925.9 in MODEL 970, 972, 974 with CODE (MS4) BlueTec 4
ENGINES 925.9 in MODEL 970, 972, 974 with CODE (MS5) BlueTec 5
ENGINES 926.9 in MODEL 958.0 with CODE (MS4) BlueTec 4
ENGINES 926.9 in MODEL 958.0 with CODE (MS5) BlueTec 5
ENGINES 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958 with CODE (MS4) BlueTec 4
ENGINES 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958 with CODE (MS5) BlueTec 5
Modification notes
5.2.07 | The following AddOn is required for engines in the model series 457 and 900: | For operation step 1 - added. |
Download | |||
1 | Connect STAR DIAGNOSIS | The following AddOn is required for engines in the model series 457 and 900: It is available at: (http://stardiagnosis.daimlerchrysler.com) As of STAR DIAGNOSIS DVD 03/07, the parameter will be available via the usual channels. | |
The following conditions MUST be fulfilled before downloading: - Battery voltage 24 V...26 V. - It is essential that the power supply for the STAR DIAGNOSIS computer remains constant throughout the entire period. | |||
During the download, do not - Start any other application, - Perform on-board diagnosis, - Run or start the engine and - Disconnect the vehicle battery. | |||
2 | Switch on ignition | ||
3 | Start Diagnosis Assistance System (DAS) | ||
4 | Select "Truck" category | ||
5 | Select "Automatic access using model series" | ||
6 | Select "Special functions" | ||
7 | Select "MR download" | ||
8 | Select "V07" | Download: MR1_23. The download is menu-assisted. Follow all of the instructions given by the Diagnosis Assistance System (DAS). | |
Parameterize | |||
9 | Switch on ignition | Only start with the parameterizing after the download is fully completed. | |
During parameterization, do not - Start any other application, - Perform on-board diagnosis, - Run or start the engine and - Disconnect the vehicle battery. | |||
10 | Start Diagnosis Assistance System (DAS) | ||
11 | Select "Truck division" | ||
12 | Select "Control unit direct entry" | ||
13 | Select "MR engine control" | ||
14 | Select "Control unit adaptations" | ||
15 | Select "Parameterization" | ||
16 | Select "Periphery parameters" | ||
17 | Select "Diffusor heating" | Parameters 35. | |
18 | Select "Proportioning valve" | Engine model series 457: proportioning valve 6 | |
Engine model series 500: proportioning valve 6 | |||
Engine model series 900: proportioning valve 1 | |||
19 | Switch ignition off and on again | When prompted by Diagnosis Assistance System (DAS). | |
20 | Confirm "Transfer central data memory (ZDS)" with the button F3 | ||
21 | Disconnect STAR DIAGNOSIS |