ar0715w200006j

Install, remove fuel return line at unit pumps

Type ar · emne 07.15 · version 0103 · 2010-11-29

Gælder for: ENGINE 900.9 in MODEL 375.1, 970, 972, 975, 976 ENGINE 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5 ENGINE 902.9 in MODEL 957 except CODE (MS8) Natural gas engine ENGINE 902.9 in MODEL 375.1, 970, 972, 974, 975, 976 ENGINE 924.9 in MODEL 958.0, 970, 972, 974, 975, 976 ENGINE 925.9 in MODEL 970, 972, 974 ENGINE 926.9 in MODEL 958.0 ENGINE 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958.2

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 07 Blandingstilberedning › 07.15 Dieselindsprøjtningssystem (PLD), motorregulering (MR) — Serie 375 (modeller 1**, 3**) · Serie 900 (modeller 9**) · Serie 902 (modeller 9**) · Serie 950 (modeller 5**, 6**) · Serie 952 (modeller 5**, 6**) · Serie 953 (modeller 6**) · Serie 954 (modeller 5**) · Serie 957 · Serie 958 (modeller 0**, 2**) · Serie 970 · Serie 972 · Serie 974 · Serie 975 · Serie 976

EinPAS 15 Motor › 15.45 Motorstyring › 15.45.13 ledning/slange/ventil — Serie 375 (modeller 1**, 3**) · Serie 900 (modeller 9**) · Serie 902 (modeller 9**) · Serie 950 (modeller 5**, 6**) · Serie 952 (modeller 5**, 6**) · Serie 953 (modeller 6**) · Serie 954 (modeller 5**) · Serie 957 · Serie 958 (modeller 0**, 2**) · Serie 970 · Serie 972 · Serie 974 · Serie 975 · Serie 976

Gælder også for motorer/gearkasser: 924 9**, 925 9**, 926 9**

AR07.15-W-2000-06J

Install, remove fuel return line at unit pumps

Fuel return line of unit pumps for compression test

WF58.50-W-0700-02A

Diesel injection system with unit pumps (MR/PLD)

Number

Designation

Engine
900.9,

Engine
902.9
without code MS8

Engine
924.9, 925.9, 926.9

BA07.15-N-1004-01A

Injection line to pressure pipe connection and unit pump

Nm

35

35

Install, remove fuel return line at unit pumps
Install, remove fuel return line at unit pumps
Install, remove fuel return line at unit pumps

000 589 68 03 00

Clamping device

Box wrench bit

Ring wrench

000 589 07 03 00

000 589 40 37 00

Install, remove fuel return line at unit pumps

W07.15-1424-05

Shown on engine 926.9

1 Attach line pieces (1) for prefabricated fuel return line (2) to unit pumps .

2 Clamp off the free hose piece (4) with terminal (3).

3 Open end cover at the fuel tank and guide the long hose piece (5) into the fuel tank.

When routing the long hose piece (5) take note of hot or rotating parts.

4 Remove in the reverse order.

Henviste dokumenter