Fuel circuit test values
Number | Designation | Engine 457.9 | ||
BE47.00-N-1004-01D | Fuel intake pressure upstream of fuel pump | Breakaway speed | bar | -0.30...-0.15 |
Fuel pipes/hoses
Number | Designation | Engine | |
BA47.25-N-1009-01M | Banjo bolt, fuel line to fuel heat exchanger | Nm | 50 |
000 589 40 37 00
Adapter parts
Clamping device
Tester
617 589 04 21 00
541 589 00 91 00
W07.15-1165-06
1 Detach fuel feed line (3) at fuel heat exchanger (1).
2 Attach testing unit (2) with testing line (2.1), banjo union (5), double banjo bolt M161.5 (4) and fuel feed line (3) at fuel heat exchanger (1).
While detaching and attaching testing lines (2.1) at the testing unit (2), do not damage or break off the plastic T-piece in the testing unit (2).
3 Disconnect the free end of the testing line (2.1) with circuit (6).
4 Place testing unit (2) at the frame and fasten.
5 Start engine and run.
6 Carry out the measurement and read off fuel intake pressure on the testing unit (2).
Measure at a maximum governed rpm of 2080.
7 Switch off engine.
8 Detach testing unit (2) with testing line.
9 Attach fuel feed line (3).
Install new sealing rings.