ar0715g200001da
Install test/measuring equipment in the low pressure fuel circuit
Type ar · emne 07.15 · version 0104 · 2011-01-19
Gælder for: ENGINE 900.91 /92, 902.91 /93, 904.94 /95 /96 /97, 906.93 /94 /95 /96 /98 /99, 924.91 /93, 926.91 /92 /93 /95 /97 in MODEL 000.001 Kraftstoffdruck-Prüfung nach dem Kraftstofffilter'
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 1 Motor › 07 Blandingstilberedning › 07.15 Dieselindsprøjtningssystem (PLD), motorregulering (MR) — Serie 000 (modeller 001) · Serie 900 (modeller 91*, 92*) · Serie 902 (modeller 91*, 93*) · Serie 904 (modeller 94*, 95*, 96*, 97*) · Serie 906 (modeller 93*, 94*, 95*, 96*, 98*, 99*)
EinPAS 16 Brændstof-/energiforsyning motor › 16.10 Brændstofforsyning › 16.10.1 Grundinformation — Serie 000 (modeller 001) · Serie 900 (modeller 91*, 92*) · Serie 902 (modeller 91*, 93*) · Serie 904 (modeller 94*, 95*, 96*, 97*) · Serie 906 (modeller 93*, 94*, 95*, 96*, 98*, 99*)
Gælder også for motorer/gearkasser: 924 91*, 924 93*, 926 91*, 926 92*, 926 93*, 926 95*, 926 97*
AR07.15-G-2000-01DA
| Install test/measuring equipment in the low pressure fuel circuit
|
|
|
1 Remove engine trim panel (1).
2 Remove fuel temperature sensor (B10).
3 Connect fuel temperature sensor (B10) with engine wiring harness (2).
4 Install adaptation part (5.1) with sealing ring on crankcase.
5 Install adaptation part (5.2), test equipment (3) and high-pressure hose (4) on
adaptation part (5.1)
