ar0715g200001be
Install test/measuring equipment in the low-pressure fuel circuit
Type ar · emne 07.15 · version 0107 · 2012-01-11
Gælder for: ENGINE 900.915 /916 /920 /921, 902.923 /924 /935, 904.927 /928 /952 /953, 906.935 /955, 924.916 /923 /931, 926.969
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 1 Motor › 07 Blandingstilberedning › 07.15 Dieselindsprøjtningssystem (PLD), motorregulering (MR) — Serie 900 (modeller 915, 916, 920, 921) · Serie 902 (modeller 923, 924, 935) · Serie 904 (modeller 927, 928, 952, 953) · Serie 906 (modeller 935, 955)
EinPAS 16 Brændstof-/energiforsyning motor › 16.10 Brændstofforsyning › 16.10.1 Grundinformation — Serie 900 (modeller 915, 916, 920, 921) · Serie 902 (modeller 923, 924, 935) · Serie 904 (modeller 927, 928, 952, 953) · Serie 906 (modeller 935, 955)
Gælder også for motorer/gearkasser: 924 916, 924 923, 924 931, 926 969
AR07.15-G-2000-01BE
| Install test/measuring equipment in the low-pressure fuel circuit
|
|
|
1 Remove engine trim panel (1).
2 Remove fuel temperature sensor (B10).
3 Install adapter piece (5.4) together with sealing ring at crankcase.
4 Install banjo union (5.5),
high pressure hose (4) and
testing unit (3) at adapter (5.4).
5 Remove fuel return line (6) from fuel filter housing (2).
Shown on engine 906
6 Remove fuel feed line (7) from fuel filter housing (2).
7 Attach connection line (5.2) with shutoff valve (5.1) to fuel filter housing (2).
