Diesel injection system with unit pumps (MR/PLD)
Number | Designation | Engine | ||
BA07.15-N-1004-01E | Injection line to pressure pipe connection and unit pump | Nm | 35 | |
BA07.15-N-1006-01E | Banjo bolt, fuel line to cylinder head | Nm | 45 | |
000 589 68 03 00
Adapter parts
Box wrench bit
Ring wrench
Retainer wrench
000 589 07 03 00
541 589 00 91 00
904 589 01 07 00
G07.15-3139-06
1 Remove engine trim panel (3).
2 Remove injection line with box wrench or box wrench bit.
Do not bend injection line. Damage can occur to the hard layer in the injection line otherwise.
For engine 900, 904, 924, remove the injection line from cylinder 2, and for engine 902, 906, 926 remove from cylinder 4.
Shown on engine 906
3 Remove fuel return line (1) from the leak oil hole in the cylinder head and attach adapter (2) with fuel return line (1).
Counterhold fuel return line (1) for removal and attachment with a
retainer wrench. The fuel return line (1) can be damaged and therefore become leaky otherwise.
4 Install injection line with box wrench attachment .
5 Place clean cloth below adapter piece (2) to collect any escaping leak fuel.