ar0715g200001bb
Install test/measuring equipment in the low-pressure fuel circuit
Type ar · emne 07.15 · version 0107 · 2012-01-11
Gælder for: ENGINE 900.915 /916 /920 /921, 902.923 /924 /935, 904.927 /928 /952 /953, 906.935 /955, 924.916 /923 /931, 926.969
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 1 Motor › 07 Blandingstilberedning › 07.15 Dieselindsprøjtningssystem (PLD), motorregulering (MR) — Serie 900 (modeller 915, 916, 920, 921) · Serie 902 (modeller 923, 924, 935) · Serie 904 (modeller 927, 928, 952, 953) · Serie 906 (modeller 935, 955)
EinPAS 16 Brændstof-/energiforsyning motor › 16.10 Brændstofforsyning › 16.10.1 Grundinformation — Serie 900 (modeller 915, 916, 920, 921) · Serie 902 (modeller 923, 924, 935) · Serie 904 (modeller 927, 928, 952, 953) · Serie 906 (modeller 935, 955)
Gælder også for motorer/gearkasser: 924 916, 924 923, 924 931, 926 969
AR07.15-G-2000-01BB
| Install test/measuring equipment in the low-pressure fuel circuit
|
|
|
1 Remove fuel feed line (4) at fuel filter housing (1).
2 Install test equipment unit (2) with test lines (2.1) and connector (3.1, 3.2) between fuel feed line (4) and fuel filter housing (1).
Connection piece (3.1) with opening clamp (arrow) must press on the check valve.
3 Attach testing unit (2) to frame.
Shown on engine 906
