ar0715g200001ba
Install test/measuring equipment in the low-pressure fuel circuit
Type ar · emne 07.15 · version 0107 · 2012-01-11
Gælder for: ENGINE 900.915 /916 /920 /921, 902.923 /924 /935, 904.927 /928 /952 /953, 906.935 /955, 924.916 /923 /931, 926.969
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 1 Motor › 07 Blandingstilberedning › 07.15 Dieselindsprøjtningssystem (PLD), motorregulering (MR) — Serie 900 (modeller 915, 916, 920, 921) · Serie 902 (modeller 923, 924, 935) · Serie 904 (modeller 927, 928, 952, 953) · Serie 906 (modeller 935, 955)
EinPAS 16 Brændstof-/energiforsyning motor › 16.10 Brændstofforsyning › 16.10.1 Grundinformation — Serie 900 (modeller 915, 916, 920, 921) · Serie 902 (modeller 923, 924, 935) · Serie 904 (modeller 927, 928, 952, 953) · Serie 906 (modeller 935, 955)
Gælder også for motorer/gearkasser: 924 916, 924 923, 924 931, 926 969
AR07.15-G-2000-01BA
| Install test/measuring equipment in the low-pressure fuel circuit
|
|
|
1 Remove engine trim panel (1).
2 Remove fuel temperature sensor (B10).
3 Connect fuel temperature sensor (B10) with engine wiring harness (2).
4 Install adapter piece (5.1) together with sealing ring at crankcase.
5 Install banjo union (5.2), testing unit (3) and high pressure hose (4) at
adapter (5.1).
Shown on engine 906
