Remove/install MR/PLD injection lines · ar0715d9235ad · Mercedes-Benz WIS

AR07.15-D-9235AD

Remove/install MR/PLD injection lines

16.8.06

ENGINE 900.917 /918 /919 in MODEL 668, 670

D07.15-0009-04

2 Engine cover

D07.15-0007-06

Shown with engine removed

1 Injection line

	Removing
1	Remove service cover
2	Remove engine trim panel (2)
 Danger!	Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel.	No fire, sparks, open flames or smoking. Only pour fuels into suitable and appropriately marked containers. Wear protective clothing when handling fuel.	AS47.00-Z-0001-01A
3	Remove injection line (1)		*000589070300
			*000589680300
	Install
 Danger!	Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel.	No fire, sparks, open flames or smoking. Only pour fuels into suitable and appropriately marked containers. Wear protective clothing when handling fuel.	AS47.00-Z-0001-01A
4	Install injection lines (1)	 Do not bend injection lines (1).
			*BA07.15-N-1004-01A
			*000589070300
			*000589680300
 Danger!	Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running	Secure vehicle to prevent it from moving by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
5	Conduct engine test run, stop engine and check in area of injection lines (1) for leaks	 Crank engine with starter for maximum 90 seconds. Wait at least for about 2 minutes before repeating attempt at starting. The fuel system is bled automatically.
6	Install engine cover (2) and maintenance hood

 Diesel injection system with unit pumps (MR/PLD)

Number	Designation		Engine 900.9, Engine 902.9 without code MS8


BA07.15-N-1004-01A	Injection line to pressure pipe connection and unit pump	Nm	35

000 589 68 03 00

Box wrench bit

Ring wrench

000 589 07 03 00

Henviste dokumenter

as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører
as4700z000101a Fare for eksplosion ved tænding, fare for forgiftning ved indånding og indtagelse af brændstof samt fare for hud- og øjenskader ved kontakt med brændstof