ar0713d841004a

Adapting driver of distributor injection pump

Type ar · emne 07.13 · version 0104 · 1997-06-04

Gælder for: ENGINE 602.980 in MODEL 901, 902, 903, 904 ENGINE 602.984 in MODEL 667, 668, 670 ENGINE 602.985 in MODEL 668, 670

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 07 Blandingstilberedning › 07.13 Dieselindsprøjtningssystem fordelerpumpe (EVE, EDC) — Serie 602 (modeller 980, 984, 985) · Serie 667 · Serie 668 · Serie 670 · Serie 901 · Serie 902 · Serie 903 · Serie 904

EinPAS 15 Motor › 15.45 Motorstyring › 15.45.51 indsprøjtningspumpe/indsprøjtningsforstiller — Serie 602 (modeller 980, 984, 985) · Serie 667 · Serie 668 · Serie 670 · Serie 901 · Serie 902 · Serie 903 · Serie 904

AR07.13-D-8410-04A

Adapting driver of distributor injection pump

Engine 602.980/984/985

Distributor injection pump

Number

Designation

Engine 602.980

Engine 602.984/
985

BA07.13-N-1005-01A

Nut of driver to injection pump

Nm

83

90

Adapting driver of distributor injection pump
Adapting driver of distributor injection pump

602 589 00 07 00

602 589 01 33 00

Puller

Retaining wrench

Adapting driver of distributor injection pump

D07.13-0016-01

1 Hold driver tight with retaining wrench and unscrew hexagon nut from injection pump shaft.

Adapting driver of distributor injection pump

P07.13-0381-01

2 Use puller to pull off drive pinion.

Before fitting on the drive pinion, remove grease on drive shaft.
Use only test petroleum, methylated spirits, glycol alcohol or isopropanol for removing grease.

Adapting driver of distributor injection pump

D07.13-0018-01

3 Adapt driver with Woodruff key to new pump and tighten nut.