D07.11-0002-06
1 Digital tester
2 Battery
3 Connecting rod
4 Vacuum pipe
5 Vacuum hose
6 Lock nut
7 TDC pulse generator
| Removing, installing | ||
1 | Connect digital tester (1) and TDC pulse generator (7) | ||
2 | Warm up engine up to coolant temperature | about 60 – 80 °C | |
3 | Detach connecting rod at engine throttle control | ||
| Testing | ||
4 | Detach vacuum pipe (4) at the PLA vacuum unit (5). Check idling speed. | Idling speed not o.k. | |
Set idling speed | |||
5 | Fit on vacuum pipe (4) | ||
6 | Attach connecting rod free of stress | ||
7 | Switch on all ancillaries and check idling speed | ||
8 | Install in the reverse order |
Test and setting data for inline injection pump with mechanical control
667 589 00 21 00
TDC pulse generator