P07.09-2035-08
1 | Vacuum hose | 3 | Vacuum hoses | |
2 | Bolts | 4 | Bracket |
Shown on model 212.098 |
5 | Vacuum line on brake booster (MODEL 212.098/298) |
6 | Vacuum reservoir |
P07.09-2048-06
| Remove/install | ||
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
1 | Remove cylinder head cover trim | ||
2 | Unhook coolant hose from holder | ||
3 | Unhook vacuum line in brake booster (5) on vacuum reservoir (6) (arrow) | Engine 651 in model 212.098/298 | |
4 | Detach vacuum hose (1) | ||
5 | Mark vacuum hoses (3) | For diagnostic reasons the vacuum hoses must not swapped around. | |
6 | Mark vacuum hoses (3) and unclip at vacuum reservoir (6) and detach | Installation: Observe marking on vacuum hoses (3). | |
7 | Remove screw/bolts (2) and remove vacuum reservoir (6) | Bolt, support brace for vacuum reservoir and exhaust heat exchanger to Y-support brace | |
Bolt, vacuum reservoir to vacuum reservoir bracket or vacuum reservoir support brace and exhaust heat exchanger | |||
8 | Install in the reverse order |
Henviste dokumenter
- as0000z003501a Livsfare ved arbejde på komponenter og systemer med U >= 30 V vekselspænding (AC) eller U >= 60 V jævnspænding (DC)