1 | Bolts |
2 | Electrical connectors |
N3/9 | CDI control unit |
P07.08-A018-05
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Notes on safety-relevant components | |||
| Remove/install | ||
1 | Connect vehicle diagnosis system and perform commissioning of CDI control unit (N3/9). | If the CDI control unit (N3/9) has been replaced. | |
| |||
2 | Remove ground line of battery. | ||
3 | Remove bolts (1). | Bolt, CDI control unit to air filter housing | |
4 | Release and disconnect electrical connectors (2). | ||
5 | Remove CDI control unit (N3/9). | ||
| Check | ||
6 | Check the seal in the air filter housing for damage. | If damage is identified, | |
| |||
replace the seal in the air filter housing. | |||
7 | Install in the reverse order. | ||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
8 | Perform an engine test run and check the engine for proper function. |
Henviste dokumenter
- ad0000p200006mfa
- ah0000p500001a Oplysninger om forebyggelse af skader på grund af snavs og fremmedlegemer
- ah0000z001901a Oplysninger om sikkerhedsrelevante komponenter
- ah5400p000101a Oplysninger med henblik på at undgå skader på elektroniske komponenter på grund af elektrostatisk afladning
- ar5410p0003mfa
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører