1, 2 | Electrical connection |
3 | Engine wiring harness |
4 | Spherical head fitting |
N3/9 | CDI control unit |
P07.08-2222-11
Danger ! | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
| Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Read out variant coding using STAR DIAGNOSIS | When replacing the CDI control unit (N3/9) | |
| |||
2 | Remove engine cover | Installation: Ensure correct seating of the engine cover. | |
3 | Pull CDI control unit (N3/9) out of rubber mount | Installation: Ensure correctly seating of the CDI control unit (N3/9). | |
4 | Disconnect electrical connections (1, 2) on CDI control unit (N3/9) | ||
5 | Unclip engine wiring harness (3) on CDI control unit (N3/9) and remove CDI control unit (N3/9) | ||
6 | Unscrew spherical head fitting (4) from the CDI control unit (N3/9) | When replacing the CDI control unit (N3/9) | |
7 | Install in the reverse order | ||
8 | Read in variant coding using STAR DIAGNOSIS | When replacing the CDI control unit (N3/9) | |
| |||
Transfer the stored variant coding of the previously installed CDI control unit (N3/9) to the new CDI control unit (N3/9) using STAR DIAGNOSIS. | |||
9 | Start up CDI control unit (N3/9) using STAR DIAGNOSIS | When replacing the CDI control unit (N3/9) | |
| |||
The CDI control unit (N3/9) must be adjusted to the vehicle using STAR DIAGNOSIS, in menu item "Commissioning". | |||
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
10 | Carry out an engine test run |
Henviste dokumenter
- ad0000p200004b
- ah5400p000101a Oplysninger med henblik på at undgå skader på elektroniske komponenter på grund af elektrostatisk afladning
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører
- as0000z001101a Fare for personskade pga. fastklemning eller knusning af fingre ved af-, påmontering og indstillingsarbejde på motorhjelm og bagklap, døre, dæksler og soltag.