ar0708p1000msc

Remove/install ME-SFI control unit

Type ar · emne 07.08 · version 0100 · 2019-01-18

Gælder for: Engine 256.9 in model 167

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 07 Blandingstilberedning › 07.08 Styreenheder — Serie 167

EinPAS 15 Motor › 15.45 Motorstyring › 15.45.11 Styreenhed/relæ — Serie 167

Gælder også for motorer/gearkasser: 256 9**

AR07.08-P-1000MSC

Remove/install ME-SFI control unit

09.11.2018

Engine

256.9 in model 167

Remove/install ME-SFI control unit

1

Electrical connectors

2

Screw

N3/10

ME-SFI [ME] control unit

P07.08-2351-06

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

Remove/install

1

Start control unit replacement with vehicle diagnosis system.

When replacing the ME-SFI [ME] control unit (N3/10).

AD00.00-P-2000-06ME

2

Switch off ignition and store transmitter keys outside of transmitter range (at least 2 m).

3

Disconnect ground line from battery.

AR54.10-P-0003ME

4

Remove upper engine cover.

AR01.10-P-2405MSC

5

Remove screw/bolts (2) .

Bolt, ME-SFI control unit to air filter housing

*BA09.10-P-1002-01MRT

6

Release and disconnect electrical connectors (1).

7

Remove ME-SFI [ME] control unit (N3/10).

Check

8

Check seal in air filter housing for correct seating and damage and replace if necessary.

9

Install in the reverse order.

Check

10

Read out and delete fault memory.

AD00.00-P-2000-06ME

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

11

Perform an engine test run and check the engine for proper function.

Air cleaner housing

Number

Designation

Engine 256.9

BA09.10-P-1002-01MRT

Bolt, ME-SFI control unit to air filter housing

Nm

6

Henviste dokumenter