ar0708p1000mro

Remove/install ME-SFI control unit

Type ar · emne 07.08 · version 0100 · 2020-05-19

Gælder for: Engine 264 in model 463

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 07 Blandingstilberedning › 07.08 Styreenheder — Serie 463

EinPAS 15 Motor › 15.45 Motorstyring › 15.45.11 Styreenhed/relæ — Serie 463

Gælder også for motorer/gearkasser: 264 ***

AR07.08-P-1000MRO

Remove/install ME-SFI control unit

18.05.2020

Engine

264 in model 463

Remove/install ME-SFI control unit

P07.08-A051-09

1

Electrical connector

3

Retaining clamp

2

Electrical connector

N3/10

ME-SFI [ME] control unit

Topical note

Notes on avoiding damage to ignition system

AH15.10-P-0002-01V

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

Remove/install

1

Start control unit replacement with vehicle diagnosis system.

When replacing the ME-SFI [ME] control unit (N3/10).

Engine 264 in model 463
as of model year 2020

AD00.00-P-2000-04B

2

Disconnect ground line from on-board electrical system battery.


Engine 264 in model 463
as of model year 2020

AR54.10-P-0003XG

3

Release and disconnect electrical connectors (1, 2).

4

Release retaining clamps (3) and take out ME-SFI [ME] control unit (N3/10)

5

Install in the reverse order.

6

Connect vehicle diagnosis system, read out fault memory and clear if necessary.

Engine 264 in model 463
as of model year 2020

AD00.00-P-2000-04B

Warning

Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust.

Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area.

AS49.00-Z-0001-01A

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

7

Conduct engine test run while checking for proper operation of the engine.

Henviste dokumenter