ar0708d1000ng

Remove/install ME-SFI control unit

Type ar · emne 07.08 · version 0100 · 2008-04-18

Gælder for: ENGINE 271.951 in MODEL 906

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 07 Blandingstilberedning › 07.08 Styreenheder — Serie 906

EinPAS 15 Motor › 15.45 Motorstyring › 15.45.11 Styreenhed/relæ — Serie 906

Gælder også for motorer/gearkasser: 271 951

AR07.08-D-1000NG

Remove/install ME-SFI control unit

10.3.08

ENGINE 271.951 in MODEL 906

Remove/install ME-SFI control unit

D07.08-1116-07

1 Wiring harness plug

2 Wiring harness plug

N3/29 ME-SFI [ME] control unit

3 Bolts

Remove/install

Notes on avoiding damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

1

Turn transmitter key in electronic ignition switch (EIS) control unit to position "0"

2

Release wiring harness connector (1) and wiring harness connector (2) and detach from ME-SFI control unit (N3/29)

3

Unscrew bolts (3) and remove from ME-SFI control unit (N3/29)

4

Install in the reverse order

5

Perform SCN coding.

When replacing the ME-SFI [ME] control unit (N3/29).

AR54.21-D-0015X

6

Perform sensor rotor adaptation using STAR DIAGNOSIS

When replacing the ME-SFI [ME] control unit (N3/29).

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-D-2000-04SD

Henviste dokumenter