ar0707s1455pd

Remove/install hot film mass air flow sensor

Type ar · emne 07.07 · version 0100 · 2017-01-16

Gælder for: Model 470, 471 with engine 699

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 07 Blandingstilberedning › 07.07 Luftmængdemåler, luftmassemåler — Serie 470 · Serie 471

EinPAS 15 Motor › 15.45 Motorstyring › 15.45.12 Sensor/kontakt/ledningssæt — Serie 470 · Serie 471

Gælder også for motorer/gearkasser: 699 ***

AR07.07-S-1455PD

Remove/install hot film mass air flow sensor

19.12.2016

Model

470, 471 with engine 699

Remove/install hot film mass air flow sensor

1

Hot film mass air flow sensor

2

Screw/bolts

3

Air filter housing

4

Electrical connection

S07.07-4518-11

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Disconnect electrical connection (4)

2

Remove screw/bolts (2) from air filter housing (3)

Screw/bolt, hot film mass air flow sensor to air filter housing

*BA09.10-N-1003-01PD

3

Remove hot film mass air flow sensor (1)

Installation: Check seal.

Depending on findings

Replace seal.

4

Install in the reverse order

Check

Danger !

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

5

Check for leaktightness with engine running

Visual inspection only.

Air filter housing, air intake, air intake pipe, hot film mass air flow sensor

Number

Designation

Model 470, 471 with engine 699

BA09.10-N-1003-01PD

Screw/bolt, hot film mass air flow sensor to air filter housing

Nm

2

Henviste dokumenter