AR07.04-T-0003A | Remove/install needle movement sensor of injection nozzle | 3.11.09 |
ENGINE 447, 489 in MODEL 671
T07.03-0004-06
| Remove/install | ||
1 | Open engine compartment flap and maintenance flap at the rear left | ||
2 | Open connecting cable connector | Protect needle movement sensor connector against damage and contamination | |
To do this press metal clamp in the direction of the arrow (1) and detach the connector (2) | |||
3 | Remove injection nozzle with claw wrench | During remove/install ensure that the connecting cable is not twisted off or damaged | |
To do this lead the cable connector through the claw wrench and lay the connecting cable in the slot | |||
| |||
| |||
4 | Install in the reverse order |
Injectors, injection valves, lines
Number | Designation | Engine 447 | Engine 489 | |
BA07.03-N-1002-01A | Thrust bolt, injection nozzle to cylinder head | Nm | 70 | 70 |
Puller
442 589 00 07 00