ar0704s0006e

Remove/install pressure differential sensor

Type ar · emne 07.04 · version 0102 · 2018-02-26

Gælder for: Model 447 with engine 651 except code MF4 (Emissions category Euro 4 N1 GR.III/N2)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 07 Blandingstilberedning › 07.04 Følere, sensorer — Serie 447 · Serie 651

EinPAS 15 Motor › 15.40 Udstødningssystem/udstødningsefterbehandling › 15.40.12 Sensor/kontakt/ledningssæt — Serie 447 · Serie 651

AR07.04-S-0006E

Remove/install pressure differential sensor

26.02.2018

Model

447 with engine 651

except code MF4 (Emissions category Euro 4 N1 GR.III/N2)

Remove/install pressure differential sensor

1

Electrical connection

2

Screw/bolt

3

Screw/bolt

4

Pressure hose

B28/12

Diesel particulate filter differential pressure sensor

S07.04-4580-11

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Remove/install

1

Remove engine cover

AR01.10-S-2405E

2

Disconnect electrical connection (1)

3

Remove screw/bolt (2)

Screw/bolt, differential pressure sensor to bracket for differential pressure sensor

*BA07.04-N-1009-01F

4

Loosen screw/bolt (3)

5.1

Remove pressure hoses (4) at diesel particulate filter

Only when removing the diesel particulate filter differential pressure sensor (B28/12).


Do not remove pressure hoses (4) from diesel particulate filter differential pressure sensor (B28/12).
Malfunction or damage can occur otherwise.

Installation: Observe assignment of the pressure hoses (4); replace clamps.

5.2

Remove pressure hoses (4) from diesel particulate filter differential pressure sensor (B28/12)

Only when replacing the diesel particulate filter differential pressure sensor (B28/12).

Installation: Note assignment of the pressure hoses (4).

6

Remove diesel particulate filter differential pressure sensor (B28/12)

7

Install in the reverse order

Check

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

8

Check for leaktightness with engine running

Visual inspection only.

Sensors, transmitters

Number

Designation

Engine 651 in model 447

BA07.04-N-1009-01F

Screw/bolt, differential pressure sensor to bracket for differential pressure sensor

Nm

9

Henviste dokumenter