Remove/install crankshaft position sensor

AR07.04-P-0059MFE

Remove/install crankshaft position sensor

30.04.2019

Engine

608 in model 118, 177, 247

Shown on model 177

1

Screw

B70

Crankshaft Hall sensor

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

 Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

 

Remove/install

1

Remove bottom engine compartment paneling.

AR61.20-P-1105MFE

2

Release and disconnect electrical connector at crankshaft Hall sensor (B70).

3

Unscrew bolt (1).

 Crankshaft position sensor to transmission housing

*BA07.04-P-1009-02C

4

Remove crankshaft Hall sensor (B70).

5

Seal exposed opening with suitable stop plug.

 Record plug

*129589009100

6

Install in the reverse order.

 Sensors

Number

Designation

Engine 608

BA07.04-P-1009-02C

Crankshaft position sensor to transmission housing

Nm

8