ar0704p0005ora

Remove/install diesel particulate filter temperature sensor

Type ar · emne 07.04 · version 0103 · 2014-12-12

Gælder for: ENGINE 607 in MODEL 117, 156, 176, 246

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 07 Blandingstilberedning › 07.04 Følere, sensorer — Serie 117 · Serie 156 · Serie 176 · Serie 246

EinPAS 15 Motor › 15.40 Udstødningssystem/udstødningsefterbehandling › 15.40.12 Sensor/kontakt/ledningssæt — Serie 117 · Serie 156 · Serie 176 · Serie 246

Gælder også for motorer/gearkasser: 607 ***

AR07.04-P-0005ORA

Remove/install diesel particulate filter temperature sensor

27.11.2014

ENGINE

607 in MODEL 117, 156, 176, 246

Remove/install diesel particulate filter temperature sensor

Shown on MODEL 176

1

Electrical line

4

Bracket

5

Retaining clip

B19/9

Temperature sensor upstream of diesel particulate filter

P07.04-2766-06

Danger !

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Danger !

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Remove/install

1

Open engine hood

2

Remove upper engine cover

AR01.20-P-5014-02OLB

3

Disconnect electrical line (1) from bracket (4) and unclip

Installation: Ensure correct routing and connection of the electrical line (1) on bracket (4).

4

Unclip electrical line (1) on diesel particulate filter

Installation: Ensure correct routing of the electrical line (1) in retaining clip (5).

5

Remove temperature sensor upstream of diesel particulate filter (B19/9) and remove

Installation: Coat thread with heat-resistant lubricant.

Temperature sensor to catalytic converter system

*BA07.04-P-1002-01O

Paste, hot lubrication 1 kg, DBL 6879.20

*BR00.45-Z-1005-06A

6

Install in the reverse order

Check

Danger !

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

7

Check leaktightness of exhaust system when engine is running

Sensors, transmitters

Number

Designation

ENGINE 607

BA07.04-P-1002-01O

Temperature sensor to catalytic converter system

Nm

32

Repair materials

Number

Designation

Order number

BR00.45-Z-1005-06A

Paste, hot lubrication 1 kg, DBL 6879.20

A 000 989 76 51

Henviste dokumenter