ar0703s6522pb

Remove/install injection valves

Type ar · emne 07.03 · version 0100 · 2017-09-07

Gælder for: Engine 200 in model 470

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 07 Blandingstilberedning › 07.03 Indsprøjtningsdyser, indsprøjtningsventiler, ledninger — Serie 470

EinPAS 15 Motor › 15.45 Motorstyring › 15.45.42 brændstoffordeler/rail/dyse/injektor — Serie 470

Gælder også for motorer/gearkasser: 200 ***

AR07.03-S-6522PB

Remove/install injection valves

12.04.2017

Engine

200 in model 470

Remove/install injection valves

1

Fuel distributor

7

Injection valves

8

Retaining clips

9

Sealing rings

S07.03-4553-06

Remove/install injection valves

7

Injector

9

Sealing ring

10

Sealing ring

S07.03-4552-02

Danger

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.

No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only.
Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Remove fuel distributor (1) with injection valves (7)

AR07.03-S-1450PB

2

Release retaining clips (8)

3

Remove injection valves (7)

Installation: Always replace sealing rings (9, 10).

4

Convert retaining clips (8) to new injection valves (7)

When replacing injection valves (7).

5

Install in the reverse order

Henviste dokumenter