ar0703d6522c

Removing and installing injection valves

Type ar · emne 07.03 · version 0102 · 1998-09-08

Gælder for: ENGINE 111.979 in MODEL 901, 902, 903, 904

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 07 Blandingstilberedning › 07.03 Indsprøjtningsdyser, indsprøjtningsventiler, ledninger — Serie 901 · Serie 902 · Serie 903 · Serie 904

EinPAS 15 Motor › 15.45 Motorstyring › 15.45.42 brændstoffordeler/rail/dyse/injektor — Serie 901 · Serie 902 · Serie 903 · Serie 904

Gælder også for motorer/gearkasser: 111 979

AR07.03-D-6522C

Removing and installing injection valves

14.2.96

ENGINE 111.979 in MODEL 901, 902, 903, 904

Removing and installing injection valves

D07.03-0004-06

1 Fuel rail

2 Injection valve

3 Retaining clip

4 Seal

5 Seal

Removing, installing

1

Remove fuel rail (1) together with injection valves (2)

AR07.03-D-1450C

2

Take off injection valves (2) at the fuel rail (1)

Installing: when inserting the retaining clip (3), ensure the anti-twist lock (arrow) at the injection valve (four-point lug) is correctyl located. Replace seals (4 and 5).

AR07.03-D-6522-01C

3

Install in the reverse order

Henviste dokumenter