ar0530g453202mt

Inspect concentricity of valve seat relative to valve guide

Type ar · emne 05.30 · version 0102 · 2007-01-24

Gælder for: MODEL 000.001 with ENGINE 444.901 Euro 1 MODEL 000.001 with ENGINE 444.901 Euro 2 MODEL 000.001 with ENGINE 447.903 Euro 2

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 05 Motorstyring › 05.30 Ventiler — Serie 000 (modeller 001) · Serie 444 (modeller 901) · Serie 447 (modeller 903)

EinPAS 15 Motor › 15.17 Motorstyring › 15.17.30 ventildrev — Serie 000 (modeller 001) · Serie 444 (modeller 901) · Serie 447 (modeller 903)

AR05.30-G-4532-02MT

Inspect concentricity of valve seat relative to valve guide

Test and adjustment values for valve guides

Number

Designation

Engine
444.901,
447.903

BE05.30-N-1002-02O

Valve seat to valve guide center offset

mm

0.02

BE05.30-N-1003-02O

Valve seat concentricity relative to valve guide

mm

0.04

Inspect concentricity of valve seat relative to valve guide

366 589 00 69 00

Valve seat turning kit

Inspect concentricity of valve seat relative to valve guide

W05.30-0026-01

1 Slip clamping ring (1) over installed valve turning device pilot and tighten.

2 Fit testing unit (2) onto clamp ring (1).

3 Set feeler gauge on testing unit (2) preloaded onto the center of the valve seat.

Slowly turn testing unit (2) around pilot and inspect variation of radial runout of the valve seat to valve guide. Refer to check values.

4 Remove testing unit (2), clamp ring (1) and pilot.