Serier
da
ar0530b453202a
Inspect concentricity of valve seat relative to valve guide
Type ar · emne 05.30 · version 0103 · 2020-02-07
Gælder for: Engine 457.9 in model 382.15, 634.0 Engine 457.9 in model 934.241/251 Engine 460.984 in model 934.241/251, 938.142 Engine 904.9, 906.9, 924.9, 926.9 (except 926.942) in model 368, 382.17 (except 382.171/176), 382.18, 384.06/07, 634.001, 685.282/284/289/290, 979.2
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 1 Motor › 05 Motorstyring › 05.30 Ventiler — Serie 368 · Serie 382 (modeller 15*, 175, 177, 178, 18*) · Serie 384 (modeller 06*, 07*) · Serie 460 (modeller 984) · Serie 634 (modeller 0**, 001) · Serie 685 (modeller 282, 284, 289, 290) · Serie 904 (modeller 9**) · Serie 906 (modeller 9**) · Serie 934 (modeller 241, 251) · Serie 938 (modeller 142) · Serie 979 (modeller 2**)
EinPAS 15 Motor › 15.17 Motorstyring › 15.17.30 ventildrev — Serie 368 · Serie 382 (modeller 15*, 175, 177, 178, 18*) · Serie 384 (modeller 06*, 07*) · Serie 460 (modeller 984) · Serie 634 (modeller 0**, 001) · Serie 685 (modeller 282, 284, 289, 290) · Serie 904 (modeller 9**) · Serie 906 (modeller 9**) · Serie 934 (modeller 241, 251) · Serie 938 (modeller 142) · Serie 979 (modeller 2**)
Gælder også for motorer/gearkasser: 457 9**, 924 9**, 926 900, 926 910, 926 911, 926 912, 926 913, 926 914, 926 915, 926 916, 926 917, 926 918, 926 919, 926 920, 926 921, 926 924, 926 925, 926 926, 926 927, 926 928, 926 929, 926 930, 926 932, 926 933, 926 934, 926 935, 926 937, 926 938, 926 941, 926 945, 926 946, 926 947, 926 948, 926 949, 926 950, 926 956, 926 959, 926 960, 926 961, 926 969, 926 970, 926 971, 926 972, 926 973, 926 974, 926 975, 926 976, 926 985, 926 986, 926 987, 926 988, 926 989, 926 990, 926 991, 926 992, 926 993, 926 994, 926 995, 926 996, 926 997, 926 998, 926 999
AR05.30-B-4532-02A
Inspect concentricity of valve seat relative to valve guide
Engine 457, 611, 612, 904, 906, 924, 926
Engine
457.9 in model 382.15, 634.0
Engine
457.9 in model 934.241/251
Engine
460.984 in model 934.241/251, 938.142
Engine
904.9, 906.9, 924.9, 926.9 (except 926.942) in model 368, 382.17 (except 382.171/176), 382.18, 384.06/07, 634.001, 685.282/284/289/290, 979.2
Number
Designation
Order number
BR00.45-Z-1059-07A
Contact paint (permanent, violet - no. 330)
Acrilex Ref. 014123
1
Properly clean the inlet or exhaust valve seat (1).
The figure on the side refers to the engines of the 900 series.
2
Cover the entire face of the valve seat (2) with a thin layer of Contact ink.
Use an inlet or exhaust valve matching the seat, in perfect condition (new or reworked).
3
Insert the valve (2) in the valve guide and, with alternating movements, hit the valve twice against the seat (1), applying moderate force.
4
Remove the valve (2) and make sure that the seat face (1) is uniformly covered by the contact ink.
Replace and/or rework the seat if you notice irregular contact.
5
Properly clean the seat and the valve.
