ar0510s7800pd

Remove/install chain tensioner

Type ar · emne 05.10 · version 0100 · 2017-10-09

Gælder for: Engine 699 in model 470, 471

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 05 Motorstyring › 05.10 Forkædedrev, tandremstræk — Serie 470 · Serie 471

EinPAS 15 Motor › 15.17 Motorstyring › 15.17.34 Kædetræk/tandrem/tandhjulsdrev — Serie 470 · Serie 471

Gælder også for motorer/gearkasser: 699 ***

AR05.10-S-7800PD

Remove/install chain tensioner

19.07.2017

Engine

699 in model 470, 471

Remove/install chain tensioner

1

Chain tensioner

2

Tool

3

Bolts

P05.10-2523-12

Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

Remove/install

1

Check basic position of camshafts

AR05.20-S-6010PD

2

Lock piston of chain tensioner (1)

For this purpose, press back piston by pressing tensioning rail in direction of chain tensioner (1) and lock using a suitable tool (2) as shown.

Installation: Remove tool (2) where chain tensioner (1) will be reused or remove delivered locking pin where chain tensioner (1) will be replaced.

Once chain tensioner (1) is installed, piston in chain tensioner (1) extends due to removal of tool (2) or locking pin and tensions timing chain.

3

Remove the chain tensioner (1)

To do this, remove screws/bolts (3).

Bolt, chain tensioner to crankcase

*BA05.10-N-1001-01PD

4

Install in the reverse order

Timing chain drive

Number

Designation

Engine 699 in model 470, 471

BA05.10-N-1001-01PD

Bolt, chain tensioner to crankcase

Nm

10

Henviste dokumenter