P05.10-2201-05
1 End piece
2 Sealing ring
3 Compression spring
4 Filler pin
5 Chain tensioner housing
6 Timing case cover
7 Sealing ring
Modification notes
| Remove | ||
1 | Remove alternator | ||
2 | Unscrew the end piece (1) from chain tensioner housing (5) and remove sealing ring (2) | ||
3 | Pull the push spring (3) and filler pin (4) out of chain tensioner housing (5) | ||
4 | Remove chain tensioner housing (5) from timing case cover (6) | ||
| Install | ||
5 | Installing chain tensioner | Installation: It is essential to follow the chain tensioner installation sequence, otherwise the chain tensioner may not function correctly. Replace the sealing rings (2, 7). | |
End piece of chain tensioner | |||
Chain tensioner housing in timing case cover | |||
6 | Install generator | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near engine | Secure vehicle to prevent it from moving. | |
7 | Conduct engine test run and check the engine for leaks |
Timing chain, chain tensioner
Henviste dokumenter
- ar0510p780002va
- ar1540p5032va Afmontering, montering af generator
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører